BARWORTH

Cable Pressurization Valves and Accessories

 
The Test fittings are made from brass Barstock, and tin-plated. Fittings incorporate type "F" test valves,
and 3/8" connectors for poly flow tubing. Two 5/16" diameter holes are provided for1/4" x 1-1/4" hammer drive anchors or 1/4 " woods screws. Cable test fittings can be used for manhole or riser pole mounting.
 
 
 
Barworth model No. 507 Hi-Valve connecting block is tin-plated brass. It is designed to permit quicker installation of a cable pressure test point with the use of poly flow tubing tow 5/16""diameter holes are provided for 1 1/4"x 1-1/4" hammer drive anchors or 1/4" wood

screws for mounting to the manhole neck. The unit is provided with five "F" type pressure-testing valves on the top and five 3/8" connectors on the bottom for poly flow tubing. A pliable clamp strip piece is provided for securing the tubing. Cable pressure readings can then be taken from any of the "F" valves.

Also Available:

  • Black and color coded harness tubing
  • Soft copper tubing - tin plated
 

Barworth model No. 435 automatic shut-off valves are for use with "C" cable manifold assembly. It is designed to prevent loss of pressure in individual cable outlets if there is a loss of flow from the main inlet source. Shut-off is bubble-tight. This valve will close when pipe pressure falls below 0.2 PSIG. Features generous flow with minimal pressure drop.

  • Brass construction and tin-plated.
  • 1/4" NPT connections.
 
Tester will confirm output efficiency of compressor. If reading is normal (green zone), compressor is producing the required output. If reading is below
normal (red zone), compressor should be removed and serviced or repaired. Tester can be used while compressor remains in air dryer.
 
 

Poly-Tube Fittings Part #
3/8" Tube x 1/8" NPT Connector P100F
3/8" Tube x 1/8" NPT Elbow P200F
3/8" Tube x 1/4" NPT Connector P400F
3/8" Tube x 3/8" Tube Union P700F
1/4" Tube x 1/4" Tube Union P800F

_______________________________________

1/8" NPT Street Tee B3750
1/8" NPT x 1/8" NPT Adapter B120
1/8" NPT x 1/4" NPT Nipple B122
1/8" NPT Street Elbow B116
1/8" NPT Male Branch Tee B3600

"F" pressure testing valve, 1/8" NPT B125
*Please Call For Availability of Other Sizes and Styles
 
Barworth "P" series mini check valves are designed to close when cable pressure drops below 0.5 PSIG. There are tin pleated and have a poppet-type design and an O-Ring seal for positive shut off.
 

Models Available:

Model No.
Size
Flow Direction
     
P100V Straight
1/8" NPT x 3/8" Tube
Pipe - Tube
P200V Elbow 90 1/8" NPT x 3/8" Tube
Tube - Pipe
P300V Straight 1/8" NPT x 3/8" Tube
Tube - Pipe
P400V Straight 1/8" NPT x 1/4" Tube
Tube - Pipe
P500V Elbow 90 1/8" NPT x 3/8" Tube
Pipe - Tube
P600V Straight 1/4" NPT x 3/8" Tube
Tube - Pipe
Micro Valve® Established line of small control valves. Quick, sure response that's a snap not to leak. Micro Valve® is the choice to solve liquid, air, and gas service design problems.

 


Series 331 Check Valves
#331-6 ----- 1/4" pipe ports
#331-8 ----- 3/8" pipe ports
#331-12 ----1/4" Pipe Ports
#331-14 ----3/4"Pipe Ports

Suitable for use in fluids and gases at pressures to 3000 PS1

 

673 Morris Turnpike • Springfield, NJ 07081
Call: (973) 376-4883 • FAX: (973) 376-5041

Click here to e-mail us: barworthinc@yahoo.com

 

[Check Valve] - [Micro Valve®] - [Flow Control Valve] - [Cable Pressurization Valve] - [Home]